Workstation - Pool Cue Lathes by Mid-America

Go to content

Main menu:

Workstation

Due to circumstances beyond my control I will not be taking any new orders for lathes for the time being.  Let me know if you have any questions. feel free to call me at 217-320-2404 between 9 AM and 4 PM EASTERN TIME... Thanks!! Todd
Please let me know if you have any questions. feel free to call me at 217-320-2404 between 9 AM and 4 PM
EASTERN TIME... Thanks!! Todd




This is j
ust a simple-basic little work station that is intended for shaft cleaning, sanding, wrap station or whatever else you want to do with it. It has a 48 inch bed, Headstock with .593 bore, 3 jaw self centering chuck opens to approx 1.4 inch, motor is 110-120 VAC, 2.5 amp 250 watt with a variable speed foot control, a drilling tailstock with 1/2 inch commercial drill chuck. The picture shows a 10 inch by 49 inch baseboard, however this set-up is shipped mounted to a 5 inch by 49 inch base... Price $440.00 + S&H.  

An optional manual speed control is available for $32.50 when
purchased with the original order(normally $37.50).  

I have had some folks ask for a larger motor. I have a 3/4 HP DC motor that has an exchange price of $295.00.  The 3/4 HP DC motor requires a heavy duty motor mount that sells for $39.50.

I also have a slow turning gear motor that will turn the setup at about 20 RPM (or slower) and is rated for continuous operation and includes a fully variable 24 volt DC speed control/ power supply that sells for $96.00 ... If you want to exchange the standard motor for the gear motor, the exchange price is $51.00.  This is very handy for applying some finishes.

If you have any questions please email us at midamericapool@yahoo.com or call 9 AM to 4PM Eastern Time 217-320-2404.  If you would like to place an order please just send us an email including your name, zip code, contact phone number and a list of the items that you wish to purchase at; midamericapool@yahoo.com   I will reply with your total and payment options.  Thanks a Million!!    Prices are subject to change without notice.


3/4 HP DC motor with power supply/variable speed control unit, forward/reverse rotation switch, plug in foot control and pulley for 2L size belt $305.00.
(requires heavy duty motor mount and belt $39.50)

The workstation is available with the optional DC gear motor for continuous slow rotation.  This is now supplied with a 24 volt DC full variable power supply/ speed control unit.  The price for the gear motor and variable powersupply is $96.00

 
Back to content | Back to main menu